Installation
Installation Guide
STEP 1
Complete the framework
-
Attach battens, noggins or metal furring strips for support, ensuring they are level and evenly spaced (450mm or 600mm spacing is recommended)
-
Attach the starter/side channel if necessary.
STEP 2
Measure the cladding panels to fit the installation area.
-
Use appropriate tools (e.g., angle grinder or a circular saw with a metal blade) to cut panels as required.
STEP 3
Tongue & groove system - start from one corner or bottom edge.
-
Fix the first panel using screws or nails. The screws should go through the tongue of the panel (it is recommended to fix a screw every 600mm).
-
Then align the groove of the second panel with the tongue of the first panel.
STEP 4
Place each new panel tightly against the previous one.
-
Ensure proper interlocking of both panels (tongue-and-groove system).
-
Continue fixing panels securely while checking alignment.
-
Seal joints and edges if required.
STEP 5
Apply sealant or flashing where necessary to prevent water penetration and for a better finish.
-
Cover exposed edges with trims or angles for a finished look.
-
Ensure the core insulation is not exposed to water for durability.
TRANSFORM YOUR SPACE
Ready to elevate your home or project? Contact us today for a free, no-obligation consultation on ceilings, walls, and facades.